
Changed nationalities of some Spanish cities to Dutch
| View previous topic :: View next topic |
| Author |
Message |
fleetp

Helmsman 
Posts: 4598 

 
26019 Gold -

|
Posted: Tue Jun 02, 2020 12:30 am Post subject: Changed nationalities of some Spanish cities to Dutch |
|
|
Download-link->https://drive.google.com/file/d/1-MH8mOIBtslCz06yXzPDW1cM-qoVF25Q/view?usp=sharing
This mod changes the following cities from Spanish to Dutch.
St. Augustine
Trinidad
Villa Hermosa
Santa Catalina
Santiago
It also makes the city of Coro available in all eras.
It allows you to run the game without needing a CD in your disk drive. (I did not design the no-CD fix), game version 1.02.
To use this mod you will probably need admin rights to the folder containing the pirates!.exe file.
Before installing the modified exe file, make a back-up copy of the original pirates!.exe file
To install the mod replace the pirates!.exe file with the modified file.
To uninstall the mod delete the modified pirate!.exe file and restore the back-up.
The mod will work on a newly started game. It does not affect a previously saved game.
Credit to
jlangsdo, corsair91 and pirate for prior work, advice and guidance. |
|
| Back to top |
|
 |
fleetp

Helmsman 
Posts: 4598 

 
26019 Gold -

|
Posted: Mon Jun 08, 2020 2:40 pm Post subject: |
|
|
In a separate topic, http://hookedonpirates.com/forums/viewtopic.php?t=8134&start=0&postdays=0&postorder=asc&highlight=
Salty Dog said Windows Defender would not let him run the modified exe file.
Corsair91 posted the following solutions:
"you may be getting a false positive on the hex edited
program file executable
Fleetp may not be using Windows Defender but an alternate Anti-Virus
instead, so may not have come across this issue.
Development Thread
How do I change a bunch of Spanish cities to other nations?
http://www.hookedonpirates.com/forums/viewtopic.php?t=8112
Reserved for Game MODS Release Thread
Changed nationalities of some Spanish cities to Dutch
http://www.hookedonpirates.com/forums/viewtopic.php?t=8116
couple of ways to add a Defender exclusion depending on your Windows 10 build version
Avoiding false positives
Add an exclusion to Windows Security
https://support.microsoft.com/en-ie/help/4028485/windows-10-add-an-exclusion-to-windows-security
If you trust a file, file type, folder, or a process that Windows Security has detected as malicious, you can stop Windows Security from alerting you or blocking the program by adding the file to the exclusions list.
Go to Start > Settings > Update & Security > Windows Security > Virus & threat protection.
Under Virus & threat protection settings, select Manage settings, and then under Exclusions, select Add or remove exclusions.
Select Add an exclusion, and then select from files, folders, file types, or process. The exclusion will apply to subfolders within a folder as well.
Last Updated: 4 Jan 2019
How to exclude files and folders from Windows Defender Antivirus scans
Are you getting false positives with Windows Defender Antivirus? Here are the steps to exclude files, folders, and other items from getting scanned on Windows 10.
6 Jul 2018
https://www.windowscentral.com/how-exclude-files-and-folders-windows-defender-antivirus-scans
see link for screenshots
On Windows 10, the Windows Defender Antivirus is your default anti-malware engine to protect your device and data from viruses, roolkits, ransomware, and other security threats.
Although for the most part the built-in Windows 10 antivirus does a pretty good job, it may flag a file or folder that you trust as malicious. If you want to prevent this type of behavior from happening, Windows Defender Antivirus includes an option to exclude files and folders, as well as file types and processes from getting scanned and blocked.
In this Windows 10 guide, we walk you through the steps to exclude specific items and locations from Windows Defender Antivirus scans.
How to prevent Windows Defender from scanning specific files
If you have certain files, folders, file types, and processes that you want to exclude from Windows Defender Antivirus scans, use the following steps:
Open Windows Defender Security Center.
Click Virus & threat protection.
Click the Virus & threat protection option.
Under "Exclusions," click the Add or remove exclusions option.
Click the Add an exclusion button.
Select the content you want to exclude from Windows Defender Antivirus, such as:
File — Excludes only one file per exclusion.
Folder — Excludes a folder and its content, including sub-folders.
File type — Instead of excluding files and folder locations, you can configure the antivirus to ignore files with a specific extension no matter their location.
Process — Excludes background processes by name.
Continue with the on-screen directions to add the new exclusion depending on your selection. (For example, if you select File, you simply need to browse and select the file you want to exclude. Or if you select the File type option, you only need to enter the extension of the file format to skip during scans.)
Once you complete these steps, you may need to repeat the instructions to exclude other items you don't want the antivirus to scan to avoid false positives.
At any time, you can remove an exclusion using the same instructions, but on step No. 5, make sure to select the item and click the Remove button."
In a floow-on post, Corsaid 91 said:
"How to disable Windows 10 Defender, if you want
and only if using another anti-virus software
https://www.windowscentral.com/how-permanently-disable-windows-defender-antivirus-windows-10
Windows 10 Home via the Registry
Windows 10 Pro via Group Policy Editor
Using the Security Center is a more recently added option
on later Windows 10 Builds
https://winbuzzer.com/2015/08/17/turn-off-turn-windows-defender-windows-10-xcxwbt/
Includes Registry file downloads to disable/enable Defender
A .reg file is a renamed text file in a specific format
and contains registry key settings.
simply double click to import the changes to your registry" |
|
| Back to top |
|
 |
fleetp

Helmsman 
Posts: 4598 

 
26019 Gold -

|
Posted: Sat Jun 13, 2020 11:28 pm Post subject: |
|
|
In a post dated 13 June 2020, Salty Dog said,
"After replacing the Pirates.exe file with the one you modded, I got the file to run by going to Programs folder, Firaxis, Sid Meier's Pirates, then I found the Pirates.exe file and right clicked on it and opened "Properties" and there was a box that said the file came from another computer - click here to allow it to run. I checked that box and fired the program up and it now runs perfectly. Thanks!!!!" |
|
| Back to top |
|
 |
Salty Dog

Sailing Master 
Posts: 10063 

 
192187 Gold -

more...
|
Posted: Sun Jun 14, 2020 12:16 am Post subject: |
|
|
What I said two posts above this one did not work. Adjusting Windows Defender did not do the job. It was when I found the Pirates.exe file and selected "Properties" and checked the box then it worked. |
|
| Back to top |
|
 |
fleetp

Helmsman 
Posts: 4598 

 
26019 Gold -

|
Posted: Sun Jun 14, 2020 2:52 am Post subject: |
|
|
| Salty Dog wrote: | | What I said two posts above this one did not work. Adjusting Windows Defender did not do the job. It was when I found the Pirates.exe file and selected "Properties" and checked the box then it worked. |
Okay, I'll delete that post.
EDIT: Based on Salty Dog's comments, it appears to me that I need to come up with an easier way for end-users to enjoy the extra Dutch cities. I'll look into alternatives as time permits (today is going to be very busy with 'real life' stuff).
EDIT 2: I tried creating a saved game using the extra dutch cities exe file, but when I attempted to run the saved game with my normal no-CD pirates!.exe file, the game crashed when I tried to exit. |
|
| Back to top |
|
 |
themodelcitizen

Gunner 
Posts: 903 

 
15615 Gold -

|
Posted: Wed Sep 16, 2020 5:40 am Post subject: |
|
|
You could move one to the southeast (as far as you can go) and make it Paramaribo, it wouldn't be perfectly located but close enough, and a Dutch city from at least the 1680 era |
|
| Back to top |
|
 |
fleetp

Helmsman 
Posts: 4598 

 
26019 Gold -

|
Posted: Wed Sep 16, 2020 5:17 pm Post subject: |
|
|
| themodelcitizen wrote: | | You could move one to the southeast (as far as you can go) and make it Paramaribo, it wouldn't be perfectly located but close enough, and a Dutch city from at least the 1680 era |
Sounds like a good idea, but I don't know how to move a city. I'd like to rename and move Puerto Principe to the southeast.
Maybe Pirate can give me some guidance. If so, I'm willing to change the Spanish to Dutch cities mod. If I did that I'd probably change Trinidad BACK to Spanish. |
|
| Back to top |
|
 |
Pirate

Helmsman 
Posts: 5927 

 
117641 Gold -

|
Posted: Wed Sep 16, 2020 5:42 pm Post subject: |
|
|
Seems like the bermuda mod was moved by the landscape file. looking at the East Indies mod there is a cityloc dta file. Anyway that's beyond my abilities to move cities. New ports could be added to the East Indies as there were more than the game listed but the reason it hasn't been done is because I don't know how. |
|
| Back to top |
|
 |
corsair91

Sailing Master 
Posts: 10370 

 
296901 Gold -

more...
|
Posted: Wed Sep 16, 2020 6:28 pm Post subject: |
|
|
jlangsdo moved both Bermuda and Barbados
so probably the best person for advice on this.
Can't recall if he ever posted a Howto guide,
think he only posted a mod link.
Jlangsdo apparently only visits the forum once in a while,
Try a PM and see if that works. |
|
| Back to top |
|
 |
fleetp

Helmsman 
Posts: 4598 

 
26019 Gold -

|
Posted: Wed Sep 16, 2020 10:43 pm Post subject: |
|
|
I'll send him a PM. |
|
| Back to top |
|
 |
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
|