
Hope for Help
| View previous topic :: View next topic |
| Author |
Message |
ti1706

Powder Monkey 
Posts: 4 


186 Gold -

|
Posted: Fri Oct 23, 2009 5:38 am Post subject: Hope for Help |
|
|
To begin, with the help of this site, and addictedtopirates.com, I have been to able to master the concept and practice (if not the skill) of editing/recoloring textures. Many thanks for that... but now I'm trying to move a bit farther.
I've read most of the threads on altering meshes... but I'm still a bit perplexed. Trying on my own, I amassed an assortment of recommended programs (Blender, which I've used before, NifSkope, PyFFi, even a few which were only briefly mentioned) only to fail, being unable to even open a .nif file in Blender (although, I did find the "import .nif" option, it didn't work, but that might mean the script had installed properly).
Since all of my knowledge on the subject has been snipped and picked from various other threads, I've decided to post, in the hopes that someone will be able to offer a clear, concise guide to editing meshes (preferably in Blender). I'd like to know how to open a .nif file in Blender, how to edit it in-depth* (if not the usual way), how to mix-and-match meshes (hats, mainly), and how to best export them, In other words, I'm requesting a tutorial.
I apologize if I seem snappish, but it's 1:30 a.m., and I'm both scatterbrained and stressed.
Some Specs (In case they matter):
Win XP Pro 32-bit
ATI Radeon (known issues with NifSkope, although, my current version, 1.0.2 works fine... other versions don't.)
512mb RAM
(Yes, I know I need to upgrade, it's on my to-do list... heh....)
*I've used Blender before, so I'm familiar with the basic concepts... still I thought I should mention my editing plans, in case there is something unusual that I need to do. |
|
| Back to top |
|
 |
rupertlittlebear

Helmsman 
Posts: 4434 


10417 Gold -

more...
|
Posted: Fri Oct 23, 2009 6:00 am Post subject: |
|
|
editing meshes is non-trivial
even for the experienced it remains a rarity.
Strangely enough, the various Bethesda forums on modding can be of help, because the more intense modders sometimes even edit meshes.
.. Morrowind mod forum
.. Oblivion mod forum
.. Fallout (3) mod forum
however even on those mod forums mesh editing is actually a rarity - people perfer to edit attributes (size, color) or skins instead of editing meshes.
Consider the Civilization Fanatics forums - those modders are more likely to actually edit a mesh.
(all named forums are easily found via Google) |
|
| Back to top |
|
 |
loki59

Rigger 
Posts: 1067 


24252 Gold -

|
Posted: Fri Oct 23, 2009 12:17 pm Post subject: |
|
|
Forget about using Blender, it's not going to work. You need to use 3ds Max with the .nif tools add on. Then you'll need to make new skins for the model as well as new animations for that model for each of the different scenes. |
|
| Back to top |
|
 |
ti1706

Powder Monkey 
Posts: 4 


186 Gold -

|
Posted: Fri Oct 23, 2009 7:25 pm Post subject: |
|
|
All I really want to do is change a nose shape, or two... and graft a few static objects (hats, a puffy collar, etc.) onto the already existing ones (heads, mainly... I'd like to give Kidd's hat to the player character).
Assuming I can get a copy of 3dsmax, if Blender will not work, will I be able to do this without reanimating the model?
If not, then, as I understand it, I'll need to alter the mesh in every animation file (.kf, right) which uses it... I won't need to actually reposition any bones, though, since the objects are static... am I correct in that?
EDIT: Looking at the system requirements for 3ds max (namely 1gb ram), it seems I will not be able to run it... unless someone has a link to an older, less ram-intensive version, by chance? |
|
| Back to top |
|
 |
sparticus

Helmsman 
Posts: 6954 

 
58730 Gold -

|
Posted: Sat Oct 24, 2009 4:56 am Post subject: |
|
|
| ti1706 wrote: | All I really want to do is change a nose shape, or two... and graft a few static objects (hats, a puffy collar, etc.) onto the already existing ones (heads, mainly... I'd like to give Kidd's hat to the player character).
Assuming I can get a copy of 3dsmax, if Blender will not work, will I be able to do this without reanimating the model?
If not, then, as I understand it, I'll need to alter the mesh in every animation file (.kf, right) which uses it... I won't need to actually reposition any bones, though, since the objects are static... am I correct in that?
EDIT: Looking at the system requirements for 3ds max (namely 1gb ram), it seems I will not be able to run it... unless someone has a link to an older, less ram-intensive version, by chance? |
You can Download a 30 day Trial of 3ds Max from the Autodesk Website :
http://usa.autodesk.com/adsk/servlet/pc/index?id=13567410&siteID=123112
If you are a student - talk to your school / college / University about how to register - and download a fully working version of 3ds Max - that will run for I think 13 Months.
These versions will be the latest - memory hungry versions.
Apart from that - there are other ways to obtain older versions - but these forums is not the place to talk about it - the threads will just get locked by the admin's.
I suggest that you use google - and your imagination. |
|
| Back to top |
|
 |
ti1706

Powder Monkey 
Posts: 4 


186 Gold -

|
Posted: Sat Oct 24, 2009 5:26 pm Post subject: |
|
|
Unfortunately, it seems that every version of 3ds max available for acquisition uses more RAM than I have (512mb)... which is why I was hoping there might be a solution involving Blender.
If that isn't the case, however, it seems like I'm going to be stuck making painted-on beards... heh....
Any last comments/recommendations before I chalk this idea (mesh-editing) up as a bad one?
(Any way to graft hats in Blender?) |
|
| Back to top |
|
 |
HatterasJack

Swabbie 
Posts: 114 


624 Gold -

more...
|
Posted: Sun Oct 25, 2009 2:00 am Post subject: |
|
|
Capn Redd sometime back posted a mod for the player that turns him into the Dread Pirate Roberts from the movie Princess Bride. His mod adds a mask and headwrap to the charactor. Would this be the same way to make and add the hat yer looking for? I don't know much mod stuff myself, or how or what he used to do it, but I just happen to think about how that particular mod worked, and thought perhaps the same trick could be used here. I'd be interested in supplying someone with a picture of my own pirate hat if they could make it a mod to use on me charactor.
Anyhoo, that's my two cents. _________________
Remember lads, pillage first, THEN burn! Get it right this time, or I'll bring my boot to ye, by thunder!! |
|
| Back to top |
|
 |
sparticus

Helmsman 
Posts: 6954 

 
58730 Gold -

|
Posted: Sun Oct 25, 2009 8:22 am Post subject: |
|
|
| ti1706 wrote: | Unfortunately, it seems that every version of 3ds max available for acquisition uses more RAM than I have (512mb)... which is why I was hoping there might be a solution involving Blender.
If that isn't the case, however, it seems like I'm going to be stuck making painted-on beards... heh....
Any last comments/recommendations before I chalk this idea (mesh-editing) up as a bad one?
(Any way to graft hats in Blender?) |
RAM is very affordable now - but Windows XP standard Version will only recognize 3 Gig - max 4 Gig - being a 32 Bit System, i.e. 2 to the power of 32 = 4.2 Gig - even an upgrade to 2 Gig will make all things faster - as less paging of memory to the page file on the harddisk. |
|
| Back to top |
|
 |
ti1706

Powder Monkey 
Posts: 4 


186 Gold -

|
Posted: Mon Oct 26, 2009 9:27 pm Post subject: |
|
|
@HatterasJack
From what I saw of that, it's a simple texture-edit, not an actual mesh-edit... though I could be wrong.
@sparticus
I'm planning on building a new computer from scratch in 2 weeks (giving this one to a relative) so upgrading my current computer would be an unnecessary action. Thanks for the thought, though.
@Everyone else
Many thanks for the replies and advice... but I've decided to return to texture-editing and NifSkope. Apparently, NifSkope can do more than I first thought... so I'm content with it.
Thanks again, everyone, for the help.
EDIT: Perhaps I'll consider mesh-editing, again, when I upgrade.... |
|
| Back to top |
|
 |
sparticus

Helmsman 
Posts: 6954 

 
58730 Gold -

|
Posted: Mon Oct 26, 2009 11:03 pm Post subject: |
|
|
| ti1706 wrote: | @HatterasJack
From what I saw of that, it's a simple texture-edit, not an actual mesh-edit... though I could be wrong.
@sparticus
I'm planning on building a new computer from scratch in 2 weeks (giving this one to a relative) so upgrading my current computer would be an unnecessary action. Thanks for the thought, though.
@Everyone else
Many thanks for the replies and advice... but I've decided to return to texture-editing and NifSkope. Apparently, NifSkope can do more than I first thought... so I'm content with it.
Thanks again, everyone, for the help.
EDIT: Perhaps I'll consider mesh-editing, again, when I upgrade.... |
Praise to the new PC  |
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
|